Free original resources

Finding and Comparing Unit Rates Worksheets

Practice finding unit rates from distance and time, comparing speeds in the same unit, and plotting constant-rate points on a graph with a clear rubric.

Free resources
Letter & A4
PDF & SVG

Free printable practice kit

Four original cases, with reference diagrams, practice sheets and worked answers. Everything is free; no signup required.

Use A4 or US Letter to match your printer. Use the stated values and conditions to solve each exercise; diagrams are not physical measuring rulers.

Preview the reference

Finding and Comparing Unit Rates Worksheets reference case 1
Decorative paper illustration
Decorative illustration; use the precise diagrams for exercises.

A unit rate tells you how much happens in one unit of time or per one item. In this worksheet skill, you divide distance by time to get metres per second, then compare two constant speeds. You will also plot each robot's distance-time points so the steeper line shows the faster rate. The key idea is that a unit rate makes different totals comparable because both are reduced to the same single-unit basis.

What a Unit Rate Means in a Distance-Time Table

A rate compares two quantities with different units, such as metres and seconds. A unit rate rewrites that comparison so the second quantity is exactly 1. For constant speed, divide distance by time: metres divided by seconds gives metres per second. If a robot travels 12 m in 3 s, the unit rate is 12 ÷ 3 = 4 m/s. That means 4 metres for every 1 second, assuming the speed stays constant.

A distance-time graph plots time on the horizontal axis and distance on the vertical axis. For a constant rate, the points lie on a straight line starting at (0, 0). The slope, or steepness, equals the unit rate. Two robots with different speeds produce lines with different slopes, so the faster robot has the steeper line. Always label axes with units before plotting.

  1. Read each row and identify distance in metres and time in seconds.
  2. Divide distance by time for each robot separately.
  3. Write the result with the unit m/s, not just a number.
  4. Compare the unit rates because both use the same unit.
  5. Plot points (time, distance) for each robot and note which line is steeper.

Comparing Rates Fairly

Comparing totals directly can mislead you. A robot that travels farther may simply have run longer. Converting both to unit rates removes that advantage because each rate describes one second. Only compare rates that share the same units; 4 m/s and 5 m/s are comparable, but 4 m/s and 5 km/h are not without conversion.

Keep the assumption of constant speed explicit. Real motion can speed up or slow down, and then a single unit rate would not describe the whole trip. On a graph, changing speed appears as a curved or bent line rather than one straight line. For these worksheets, treat each robot's speed as steady unless a problem states otherwise.

  1. Check that both rates use identical units before comparing.
  2. State which rate is larger and therefore which robot is faster.
  3. If units differ, convert one rate before comparing.
  4. Record the assumption that speed is constant.

Plotting and Checking Your Work

Plot the origin (0, 0) because zero time means zero distance at a constant rate. Then plot each robot's given point. A second point helps confirm the line: at 1 second, distance equals the unit rate. For Robot A at 4 m/s, the point (1, 4) lies on the same line as (3, 12).

Check division by multiplying back: 4 m/s × 3 s = 12 m. This catches swapped numbers and unit errors. Label each line with the robot name so the comparison stays clear.

  1. Mark (0, 0) and each robot's given point.
  2. Add a check point at 1 second using the unit rate.
  3. Draw a straight line through the points for each robot.
  4. Multiply rate by time to verify each distance.

Using a Rubric for Graph Work

Graphing has several valid presentations, so judge the work by criteria rather than one exact picture. A correct graph can use different scales as long as the axes are labeled and the points are placed accurately. Focus on whether the unit rates are correct, units are stated, and the steeper line matches the faster robot.

  1. Confirm each unit rate is calculated and labeled with m/s.
  2. Check axes are labeled with time (s) and distance (m).
  3. Verify points match the table values.
  4. Confirm the steeper line belongs to the faster robot.

Check your work

Worked example

Robot A moves 12 m in 3 s. Robot B moves 20 m in 4 s. Assume each speed is constant. Find both unit rates and identify the faster robot.

Show the worked explanation

A: 4 m/s; B: 5 m/s. Robot B is faster. For each robot divide distance by time. Compare the rates using the same unit, metres per second.

Common mistakes

Questions and answers

Why divide distance by time rather than time by distance?

Dividing distance by time gives metres per second, a rate describing one second. Time divided by distance gives seconds per metre, a different rate.

Does the steeper line always mean the faster robot?

Yes, when both axes use the same units and scale. Slope equals distance divided by time, so a steeper line means more metres per second.

What if the two robots have equal unit rates?

Their lines have the same slope and overlap if plotted on the same axes. Neither is faster under the constant-speed assumption.

Continue learning

All math worksheets · Free coordinate paper

Original resources · CC BY 4.0 · Free for personal and classroom use with attribution.

Worksheet preview

Full printable sheet preview

Fit-to-screen preview. Download the PDF to print at actual size.