Free original resources

Subtracting Decimals on a Place-Value Grid Worksheets

Teach decimal subtraction with place-value grids: align decimal points, fill empty places with zeros, regroup across columns, and check answers by adding back.

Free resources
Letter & A4
PDF & SVG

Free printable practice kit

Four original cases, with reference diagrams, practice sheets and worked answers. Everything is free; no signup required.

Use A4 or US Letter to match your printer. Use the stated values and conditions to solve each exercise; diagrams are not physical measuring rulers.

Preview the reference

Subtracting Decimals on a Place-Value Grid Worksheets reference case 1
Decorative paper illustration
Decorative illustration; use the precise diagrams for exercises.

Subtracting decimals becomes clearer when each digit sits in a labeled column. A place-value grid keeps tenths under tenths and hundredths under hundredths, so regrouping is visible rather than guessed. This page explains how to set up subtraction on a grid, when to regroup, and how to check the result. It suits learners who can subtract whole numbers and are ready to extend that column method to decimals with one or two decimal places.

Set up the grid before subtracting

Write the larger number on the top row and the number being subtracted below it. Put the decimal points directly above and below each other, then label columns from left to right: ones, decimal point, tenths, hundredths. If one number has fewer decimal places, write zeros in the empty cells so every column holds a digit. For example, 4 has no tenths or hundredths, so record it as 4.00 on the grid. This does not change its value; it only makes the columns complete.

Keep the decimal point in its own narrow column and bring it straight down into the answer row. The digits to its left are whole numbers; the digits to its right are parts of one whole. Reading the grid aloud, column by column, helps learners see that 4.00 and 4 name the same amount.

  1. Write the first number across the top row of the grid.
  2. Write the second number beneath it, matching decimal points exactly.
  3. Fill any empty decimal cells with zeros.
  4. Label each column: ones, tenths, hundredths.

Regroup one column at a time

Start at the rightmost column and move left. If the top digit is at least the bottom digit, subtract and record the difference. If the top digit is smaller, borrow one unit from the column to its left. That one unit is worth ten in the current column, so add ten to the top digit and reduce the neighbor by one. On a grid, cross out the changed digit and write its new value above it, then write the increased digit in the current column.

Work through every column, including zeros. A zero in the top row often needs regrouping from further left, which is why filling empty places with zeros first prevents confusion. Stop when you reach the ones column, then copy the decimal point down into the answer.

  1. Begin at the hundredths column.
  2. If the top digit is too small, borrow one from the tenths column and add ten to the hundredths digit.
  3. Record the difference in the answer row beneath that column.
  4. Repeat for tenths, then ones, borrowing from the left when needed.
  5. Bring the decimal point straight down into the answer.

Check the answer by adding back

Subtraction can be checked with addition: the difference plus the number subtracted should equal the first number. Line the check up on the same grid so place values still match. If the sum does not match, recheck the column where regrouping happened, since a borrowing error usually shows up there.

Estimate first as a second check. Round each number to the nearest whole number, subtract mentally, and confirm the exact answer is close. For 4.2 minus 1.89, the estimate is 4 minus 2, or 2, and the exact answer 2.31 is reasonably near it.

  1. Write the difference and the second number on a fresh grid.
  2. Add column by column from the right.
  3. Compare the sum with the first number; they should match exactly.

Use a rubric, not a single right look

Grid work is a reasoning record, so judge the process as well as the answer. A correct answer with no visible regrouping is harder to diagnose than a clear grid with one slip. When marking, note whether columns are aligned, whether zeros were used to complete places, whether borrowing is shown, and whether the decimal point is placed correctly.

Different valid layouts exist: some learners cross out digits above the grid, others rewrite the whole top row after each borrow. Both are acceptable if the values stay consistent and the final difference is correct.

  1. Check alignment of decimal points first.
  2. Check that empty decimal places were filled with zeros.
  3. Check each borrow is shown and worth ten in the next column.
  4. Check the decimal point in the answer sits directly below the others.

Check your work

Worked example

Calculate 4 - 1.78. Show place-value reasoning.

Show the worked explanation

2.22 Align decimal points; regroup before subtracting a larger digit in a column. The exact result is 2.22.

Common mistakes

Questions and answers

Why write 4 as 4.00 on the grid?

Writing zeros fills the tenths and hundredths columns so every digit has a matching place. The value stays the same; only the written form changes.

When do I need to regroup?

Regroup when the top digit in a column is smaller than the bottom digit. Borrow one unit from the column to the left, which is worth ten in the current column.

How can I check a decimal subtraction answer?

Add the difference to the number you subtracted. The sum should equal the first number exactly, with decimal points aligned.

Continue learning

All math worksheets · Free coordinate paper

Original resources · CC BY 4.0 · Free for personal and classroom use with attribution.

Worksheet preview

Full printable sheet preview

Fit-to-screen preview. Download the PDF to print at actual size.