Free original resources

Comparing Linear Functions: Graphs, Tables and Equations

Learn to compare linear functions shown as graphs, tables or equations by reading slope and initial value, then checking which output is greater at a chosen x-value.

Free resources
Letter & A4
PDF & SVG

Free printable practice kit

Four original cases, with reference diagrams, practice sheets and worked answers. Everything is free; no signup required.

Use A4 or US Letter to match your printer. Graph coordinates determine the answers; these worksheets are not physical measuring rulers.

Preview the reference

Comparing Linear Functions: Graphs, Tables and Equations reference case 1
Decorative paper illustration
Decorative illustration; use the precise diagrams for exercises.

Linear functions can look different depending on whether they appear as a graph, a table or an equation, but they describe the same kind of relationship. Comparing them means finding two features: the slope, which tells how the output changes when x increases by 1, and the initial value, which is the output when x is 0. This page shows how to extract those features from each representation and use them to compare function values at a specific x.

Read slope and initial value from each representation

In an equation written as y = mx + b, the coefficient m is the slope and b is the initial value. A table often includes the row where x is 0, which gives the initial value directly; the slope is the change in y divided by the change in x between two rows. On a graph, the initial value is the y-intercept, where the line crosses the vertical axis, and the slope is rise divided by run between two clear points.

Keep signs attached to both numbers. A slope of -2 means the output falls by 2 each time x increases by 1. An initial value of -3 means the line crosses the y-axis below zero. Comparing signed values numerically is different from comparing their absolute sizes: -1 is greater than -2, even though 2 is farther from zero.

  1. For an equation y = mx + b, record m as slope and b as initial value.
  2. For a table, find the y-value paired with x = 0; then compute (change in y) divided by (change in x) between two rows.
  3. For a graph, locate the y-intercept and count rise over run between two points on the line.
  4. Write both functions in the same form before comparing.

Compare outputs at a chosen x-value

Slope and initial value describe a whole line, but a question may ask which function has the greater value at one particular x. Substitute that x into each rule, or read the corresponding y-value from the table or graph. Do not assume the function with the larger slope is always greater at that point; lines can cross.

A useful check is to compare at x = 0 first, where the initial values decide, then compare at the requested x. If the two results are equal, say so rather than forcing a winner. Equality is a valid comparison outcome.

  1. Substitute the requested x into each equation, or locate that x in each table or graph.
  2. Compute each output carefully, keeping negative signs.
  3. Compare the two outputs and state which is greater, or that they are equal.
  4. Check the result against the slopes: the function with the larger slope should be gaining faster as x increases.

Use a comparison table to organize the work

A short comparison table prevents mixing up features from different functions. Label one column for each function and rows for slope, initial value and value at the requested x. Fill each cell from the original representation, then compare row by row.

When a graph is involved, choose two points that lie exactly on grid intersections so the rise and run are whole numbers. If the table already gives two points, use those instead of estimating from the picture. State the points you used so the reasoning can be checked.

  1. Draw columns for Function A and Function B.
  2. Add rows for slope, initial value and output at the target x.
  3. Fill each cell from the source representation, showing the two points used for slope.
  4. Compare the rows and write a sentence explaining the conclusion.

Worked example

Function A is shown as a table with points (0, 1), (1, 3) and (2, 5). Function B is y = 1x + 3. Compare their slopes and initial values, then decide which has the greater value at x = 2.

Show the worked explanation

For Function A, the y-value at x = 0 is 1, so the initial value is 1. Between (0, 1) and (1, 3), y changes by 2 while x changes by 1, so the slope is 2. Function B has slope 1 and initial value 3. At x = 2, Function A gives 2(2) + 1 = 5, and Function B gives 1(2) + 3 = 5. The outputs are equal at x = 2, even though A has the larger slope and B has the larger initial value.

Common mistakes

Questions and answers

What if the table does not include x = 0?

Extend the pattern by subtracting the slope repeatedly, or use two points to find the slope and then work backward to the y-value at x = 0.

Can two different linear functions have the same value at the requested x?

Yes. If the outputs are equal at that x, the lines meet there. Report equality rather than choosing one as greater.

Does the graph need to be perfectly to scale to compare functions?

Use the labeled points and grid intersections to read slope and intercept. If the graph is unclear, rely on the table or equation for exact values.

Continue learning

All math worksheets · Free coordinate paper

Original resources · CC BY 4.0 · Free for personal and classroom use with attribution.

Worksheet preview

Full printable sheet preview

Fit-to-screen preview. Download the PDF to print at actual size.