How to Draw Pool Table — Free Practice Sheets

Drawing a pool table is mostly a lesson in proportion and placement. The felt bed must read as a long rectangle, the rails must sit as a raised border around it, and the six pockets must land at the corners and the midpoints of the long sides. This page explains the order of construction and how to judge your own drawing fairly, since several correct versions can exist.

Build the table from the bed outward

Start with the largest shape, because every later detail depends on it. Draw a long rectangle for the felt bed, then give it a slight perspective by making the far edge a little shorter than the near edge. Keep the long sides parallel to each other and the short sides parallel to each other.

Next, add a thicker border around the felt for the rails. The rails should sit outside the felt rectangle, not inside it, so the playing surface stays clearly visible. Corner caps can be drawn as small rounded or squared blocks where two rail sections meet.

1. Draw a long rectangle for the felt bed, with the far edge slightly shorter than the near edge.
2. Add a thicker raised border around the felt for the rails.
3. Mark small corner caps where the rail sections meet.

Place the six pockets and the legs

A standard pool table has six pockets: one at each of the four corners and one at the midpoint of each long side. Place them before adding nets, so the openings stay evenly spaced. Corner pockets can show a small hanging net below the rail; side pockets are usually drawn as simple openings.

The table needs four sturdy legs. Draw them beneath the corners of the table body, using a wider top and bottom with a narrower middle for a turned shape. Keep the legs vertical and roughly equal in height so the table looks stable.

1. Mark pocket openings at the four corners and at the midpoints of the two long sides.
2. Add small net shapes below the corner pockets.
3. Draw four legs beneath the table, each with a wider top and bottom.

Add identifying details and check your work

A small ball on the felt helps the drawing read as a pool table rather than a generic table. Simple line details on the rails and legs add structure without clutter. Keep the ball small relative to the felt so the surface still looks open.

Compare your drawing with the reference sheet by checking features, not by matching every line. Ask whether the felt is clearly rectangular, whether the rails sit outside it, whether all six pockets are present, and whether four legs support the body.

1. Draw a small ball on the felt.
2. Add simple line details to the rails and legs.
3. Check the felt shape, rail border, six pockets, and four legs against the reference.

Check your work

• The felt bed reads as a long rectangle, with the far edge slightly shorter than the near edge.
• The rails form a raised border outside the felt, with corner caps where sections meet.
• Six pockets are present: four at the corners and two at the midpoints of the long sides.
• Corner pockets show small hanging net shapes.
• Four legs sit beneath the table body, roughly equal in height and vertical.
• A small ball appears on the felt without crowding the surface.

Worked example

pool table: Trace the reference outline, then practise the contour independently. Compare with the separate full reference sheet.

Common mistakes

• Drawing the rails inside the felt rectangle, which shrinks the playing surface. Draw the felt first, then add the rail border outside its edges.
• Placing pockets only at the corners and missing the two side pockets. Mark one pocket at each corner and one at the midpoint of each long side.
• Making the legs uneven in height so the table looks tilted. Keep the legs vertical and roughly equal, with matching top and bottom widths.

Questions and answers